Genie Z-34 Manual do Utilizador descarregar pdf (Página 7)

Part No. 56011 Genie Z-34/22 Bi-Energy 5

Operator's Manual

First Edition • Fifth Printing

SAFETY RULES

Collision Hazards

Be aware of limited sight

distance and blind spots

when driving or operating.

Be aware of boom position when rotating the

turntable.

Machine must be on a level surface or secured

before releasing the brakes.

Do not drive the machine with the remote brake

system released. If the travel alarm sounds when

not driving, the remote brake system is released.

Check the work area for overhead obstructions or

other possible hazards.

Be aware of crushing hazards when grasping the

platform guard rail.

It is recommended that operators wear an approved

hard hat when operating the machine.

Observe and use color-coded direction arrows on

the platform controls and drive chassis for drive

and steer functions.

Do not lower the boom unless the area below is

clear of personnel and obstructions.

Limit travel speed according to the condition of the

ground surface, congestion, slope, location of

personnel, and any other factors which may cause

collision.

Do not operate a boom in the path of any crane

unless the controls of the crane have been locked

out and/or precautions have been taken to prevent

any potential collision.

No stunt driving or horseplay while operating a

machine.

Damaged Machine Hazards

Do not use a damaged or malfunctioning machine.

Conduct a thorough pre-operation inspection of

the machine and test all functions before each

work shift. Immediately tag and remove from

service a damaged or malfunctioning machine.

Be sure all maintenance has been performed as

specified in this manual and the

Genie Z-34/22

Bi-Energy Service Manual.

Be sure all decals are in place and legible.

Be sure the operator’s, safety and responsibilities

manuals are complete, legible and in the storage

container located on the platform.

1 2 3 4 5 6 7 8 9 10 11 12 ... 30 31

Comentários a estes Manuais

Sem comentários