Genie Z-34 Manual do Utilizador descarregar pdf (Página 18)

16 Genie Z-34/22 Bi-Energy Part No. 56011

Operator's Manual First Edition • Fifth Printing

FUNCTION TESTS

Test the Steering

25 Press down the foot switch.

26 Depress the thumb rocker switch on top of the

drive control handle in the direction identified

by the blue triangle on the control panel.

Result: The steer wheels should turn in the

direction that the blue triangles point on the

drive chassis.

27 Depress the thumb rocker switch in the

direction identified by the yellow triangle on the

control panel.

Result: The steer wheels should turn in the

direction that the yellow triangles point on the

drive chassis.

Test Drive and Braking

28 Press down the foot switch.

29 Slowly move the drive control handle in the

direction indicated by the blue arrow on the

control panel until the machine begins to move,

then return the handle to the center position.

Result: The travel alarm should sound. The

machine should move in the direction that the

blue arrow points on the drive chassis, then

come to an abrupt stop.

30 Slowly move the drive control handle in the

direction indicated by the yellow arrow on the

control panel until the machine begins to move,

then return the handle to the center position.

Result: The travel alarm should sound. The

machine should move in the direction that the

yellow arrow points on the drive chassis, then

come to an abrupt stop.

Note: The brakes must be able to hold the machine

on any slope it is able to climb.

Test Limited Drive Speed

31 Press down the foot switch.

32 Raise the primary boom 1 foot / 30 cm.

33 Slowly move the drive control handle to the full

drive position.

Result: The maximum achievable drive speed

with the primary boom raised should not

exceed 1 foot / 30 cm per second.

34 Lower the boom to the stowed position.

35 Raise the secondary boom 1 foot / 30 cm.

36 Slowly move the drive control handle to the full

drive position.

Result: The maximum achievable drive speed

with the secondary boom raised should not

exceed 1 foot / 30 cm per second.

37 Lower the boom to the stowed position.

38 Extend the primary boom 1 foot / 30 cm.

39 Slowly move the drive control handle to the full

drive position.

Result: The maximum achievable drive speed

with the primary boom extended should not

exceed 1 foot / 30 cm per second.

If the drive speed with the primary boom raised or

extended or the secondary boom raised exceeds

1 foot / 30 cm per second, immediately tag and

remove the machine from service.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 30 31

Comentários a estes Manuais

Sem comentários

Genie Z-34 Manual do Utilizador Página 18

Comentários a estes Manuais

Manuais e produtos relacionados com Para o carro Genie Z-34